Bright round bars
Approx. 0.197–4.528 in | 5–115 mm
Cold drawn, centerless ground, peeled and polished, or smooth turned. Multiple tolerance and heat-treatment options; lengths up to 6.5 m.
Product program
Stainless & Special Steel Product Program
A focused stainless and special steel program spanning close-tolerance bars, structural shapes, and feedstock for further manufacturing.
Program / 01
Precision starts with the bar.
A focused range for machining, shafting, and component production.
Precision shaft quality bars
Approx. 0.315–3.189 in | 8–81 mm
Tolerance options include h7, h8, h9, j6, f7, and f8. Published straightness of 0.015 in TIR per 10 ft; lengths up to 6.4 m.
Hexagonal bright bars
Approx. 0.630–2.165 in | 16–55 mm
Hexagonal stock with h11, k12, or k13 tolerance options. Solution-annealed or quenched-and-tempered conditions; lengths up to 6 m.
Square bright bars
Approx. 0.500–2.165 in | 12.7–55 mm
Square-section stock with deburred or plain ends. Polishing and heat-treatment options; lengths up to 6 m.
Cold drawn flat bars
304L / 316L / 316Ti / 321
Cold drawn and pickled, solution annealed. h11 tolerance and ASTM A484 references; lengths from 2 to 6 m.
Program / 02
Profiles with purpose.
Hot rolled products and structural shapes for fabrication and industrial applications.
Hot rolled round bars
16–125 mm diameter
Black-surface round bars, with heat-treatment and grinding options. Lengths up to 8 m.
HRAP flat bars
Widths and thicknesses on inquiry
Hot rolled, annealed, and pickled flat bars. ASTM A484 / EN 10058 references; lengths up to 6.4 m.
HRAP equal angles
Equal-leg sections
Annealed and pickled angles with deburred or plain ends. Lengths up to 6.4 m.
HRAP unequal angles
Unequal-leg sections
Additional section choices for fabrication needs. Grade and dimensional options on inquiry.
Channels
Taper and parallel flange options
Channel profiles for industrial fabrication. Section sizes and supply conditions on inquiry.
T-profiles
50 × 50 × 5 mm
HRAP condition. ASTM A484 / EN 10055 references; lengths up to 6.4 m.
Program / 03
Built for the next process.
Feedstock, large sections, and bar products for further manufacturing.
Forged & proof machined bars
120–550 mm diameter
Ultrasonic-tested bars with annealed, normalized, or quenched-and-tempered options. Up to 6 m long.
Round cornered squares (RCS)
45–100 mm sections
Hot rolled stock for open- and closed-die forging. Grinding options; lengths up to 8 m.
Continuous cast billets & blooms
Square, round, rectangular
Feedstock for forging, rolling, ring rolling, and upsetting. Sizes and conditions on inquiry.
Forging quality ingots
Sizes and weights on inquiry
For open-die hot forging, re-rolling, and ring rolling. Heat, grade, size, and weight identification.
Threaded bars
M6–M45 published range
Fully threaded, rolled-thread bars. 304 and 316 grade families; thread standard and fit to be confirmed.
Deformed bars
16 / 20 / 25 / 28 / 32 / 36 / 40 mm
Stainless reinforcing bar program. Lengths up to 12 m; source references IS 16651 and BS 6744.
Published mill ranges; availability depends on grade, size, and order requirements. Inch conversions are approximate. Confirm tolerances, finish, final dimensions, applicable standards, and U.S. project or code requirements with your quotation. HRAP means hot rolled, annealed, and pickled.
Let’s talk material.