Machining & fabrication
Close-tolerance bright bars and shaft quality stock supplied to size, tolerance, and heat-treatment condition for component production.
Gallery & case studies
Product Gallery and Case Studies
Every product family and mill capability from the K Metal program, organized by category. Jump to a section or browse the full catalog.
Gallery
Precision bars
Bright round bars
Cold drawn, ground, peeled and polished, or smooth turned rounds.
Precision shaft quality bars
Close-tolerance shafting in h7, h8, h9, j6, f7, and f8 options.
Hexagonal bright bars
Hexagonal stock with h11, k12, or k13 tolerance options.
Square bright bars
Square-section stock with polishing and heat-treatment options.
Cold drawn flat bars
304L, 316L, 316Ti, and 321 flats, cold drawn and pickled.
Gallery
Structural profiles
Hot rolled round bars
Black-surface rounds from 16 to 125 mm diameter.
HRAP flat bars
Hot rolled, annealed, and pickled flats to ASTM A484 / EN 10058.
HRAP equal angles
Annealed and pickled equal-leg angles up to 6.4 m.
HRAP unequal angles
Unequal-leg sections for fabrication needs.
T-profiles
50 × 50 × 5 mm T-sections in HRAP condition.
Channels
Taper and parallel flange channel profiles.
Gallery
Forging & feedstock
Forged & proof machined bars
Ultrasonic-tested bars from 120 to 550 mm diameter.
Round cornered squares
45–100 mm RCS for open- and closed-die forging.
Continuous cast billets & blooms
Square, round, and rectangular feedstock for further processing.
Forging quality ingots
For open-die hot forging, re-rolling, and ring rolling.
Threaded bars
Rolled-thread bars across the M6–M45 published range.
Deformed bars
Stainless reinforcing bar from 16 to 40 mm, up to 12 m.
Gallery
Mill capabilities
The K Metal program
Stainless and special steel across precision bars, profiles, and forging stock.
Steel melting & refining
Source mill melting, refining, and casting capability.
Cold finishing
Cold finishing, heat treatment, and surface preparation.
Where the material goes
Applications in practice.
Process & energy equipment
Austenitic, duplex, and precipitation-hardening grades for pumps, valves, fittings, and corrosion-critical service.
Forging & re-rolling
RCS, billets, blooms, and ingots supplied as feedstock for open-die forging, ring rolling, and upsetting.
Representative applications. Confirm grade, tolerances, finish, testing, and documentation requirements with your quotation.
Let’s talk material.